Q: On a GFCI outlet, which wires should be connected to the line side?
A: When wiring a GFCI outlet the black wire carrying 120 volts with its corresponding neutral is connected to the line side. The black wire will attach to the gold screw and the white wire will attach to the silver screw.

Q: Does it matter which way a standard receptacle is wired.
A: Yes. To maintain proper circuit polarity the receptacle will indicate on the back where the black wire is to be terminated and where the white wire is to be terminated. If this is not visible generally the black wire goes on the gold screw and the white wire goes on the silver screw.

Q: How do I keep a spray can of texture from clogging up after use during storage?
A: To combat the issue of clogging when using a can of texture spray; after each use flip the container upside down engaging the trigger mechanism let content spray until only air is exiting the can this will clear the chamber and stop your clogging issue.

Q: How do I test if the coil on an AC contactor is good?
A: Shut power off to unit. Remove all the wires from the left and right low voltage terminals on the contactor coil then set your multimeter to continuity. This setting will beep when continuity is present. Take both the leads from your multi meter place one on the left low voltage terminal and place the other on the right low voltage terminal. If the multimeter beeps indicating continuity the contactor coil is good. If the multimeter does not beep indicating a broken path or no continuity the contactor coil is bad and needs to be replaced.

Q: When I power wash my property should I use bleach or chlorine?
A: When power washing your property, chlorine is a much more efficient cleaning agent be sure to wear your proper PPE and rinse thoroughly after application. Be careful not to allow chlorine to dry especially when applied to metal components.

Q: When should I check my battery acid levels in my golf cart?
A: This should be done on a weekly basis. You should always have distilled water on hand if the water levels need additional liquid. Golf cart batteries are very expensive and can be maintained very easily using this method.

Q: After I do my monthly inspection walk do I need to give the residents notice to enter the unit for the repairs?
A: Yes, you will need to give your residence a 24-hour notice before completing any work orders generated during your monthly inspection.

Q: Should I remove the toilet before my flooring vendor installs the vinyl in the bathroom?
A: Yes. By removing the toilet this allows the vendor to install the flooring near the toilet flange giving a nice clean industry standard look.

Q: What type of caulking should be used when sealing a tub.
A: Silicone caulking should be used when sealing tubs, tub surrounds, and plumbing fixtures. This will safeguard against leaks, mold and mildew.

Q: Can I clean the over spray off a sprinkler head.
A: No. If a sprinkler head has been painted or has corrosion the sprinkler head is considered damaged and needs to be replaced by a licensed vendor.

Q: How do I determine whether a refrigerator start relay is inoperable?
A: Remove the relay lift it up to your ear and shake the relay back-and-forth. If it makes a rattling sound the relay is damaged and needs to be replaced.

Q: Do all unit entry doors need to have weather stripping?
A: If the entry door to a unit or building was constructed to include a weather seal of any sort the weather seal must be present and functioning as designed. If the door was not constructed from the manufacturer to include weather stripping, then no seals are needed however if it is determined that said door needs some form of weather seal the aftermarket seal kit that is used shall be installed to industry standards.

Q: Do my Range fire stop have an expiration date?
A: Stove Top Fire Stop’s fire suppression canisters have a six-year effective life. After six years from the manufacturing date, the canisters must be replaced or removed. The “Replace By” date is stamped on the label of each product

Q: What is the definition of industry Standard?
A: Industry standards are a set of criteria within an industry relating to the standard functioning and carrying out of operations in their respective fields of production. In other words, it is the generally accepted requirements followed by the members of an industry.

Q: Are chain locks allowed on entry doors?
A: Yes, if a key is not required to disengage the chain lock.

Q: Why are my windows on my property fogging up and allowing condensation between the panes?
A: This is caused by the deterioration of the thermopane seal of the window. When this occurs the windows efficiency dramatically decreases. The windowpanes effected by this will need to be replaced.

Q: Am I still allowed to use secondary thumb locks on the windows at my property?
A: Yes, however these shall not be the primary locking mechanism on the window. All factory locks shall be intact and thumb locks shall be hand tight so to assure removal by the resident is possible.

Q: If there is a hole in an interior door can I patch the hole?
A: No. If the door has a hole than the door needs to be replaced.

Q: I have a damaged refrigerator seal how can I repair it?
A: If the damage to the seal is one inch or less you may repair the damaged area with white electrical tape. If the repair is greater than one inch the seal needs to be replaced.

Q: When should I change my smoke detector batteries?
A: It is a good practice to change your smoke detector batteries when you are having your fire extinguishers re-tagged

If you have questions that you would like to see added to this FAQ page, please submit them here: